Drying Oven Operating Instructions With Touch Screen Operator Interface

When You Turn It On, Air Should Come Out On The Right Side Of The Oven, As You Facing The End Wall, If It Is Coming Out Of The Left It Means That Your Motor Is Running Backwards, Change Two Leads On The Motor Starter To Change Rotation.

As You Face The Control Panel, The Lone Starter On The Left Controls The Blower

On The Front Panel Turn Oven On

After A Few Seconds The Green Light Turns On

It Indicates That The Blower Started Running

Push The Start Button, Amber Light Turns On,

It Indicates That The Heaters Are Unabled

After A Few Seconds The Red Light Turns On, Indicating That The Heaters Are Working.

Pressing The Stop Button, Heaters Will Turn Off, But The Blower Will Continue Running For A Set Time In Order To Allow The Heaters To Cool Down

The Operator Interface Has The Following Settings:

Set Time: The Total Number Of Minutes That The Oven Will Be Running. A Setting Of 120 Means That It Will Run For 2 Hours.

Actual Time: Displays The Number Of Minutes That The Oven Has Been Running Since Start Up.

Set Temp: Here You Set The Desired Temperature You Want The Oven To Reach, Format Is 1800 , Means You Have Set The Oven At 180 Degrees

Degrees: Display The Actual Temperature In The Return End Of The Oven.

Heaters On: The Amount Of Time Heaters Will Be On. If You Want To Heat Up Faster Make This Setting Longer

Heaters Off: The Amount Of Time Heaters Will Be Off

If You Want To Heat Up Faster Make This Setting Shorter

We Have This Settings In Order To Save Energy, Since It Takes Some Time To Remove The Heat From The Heaters Into The Chamber.

Safety: The Amount Of Time That The Blower Will Continue Running After The Set Time Has Been Reached. This Feature Allows For The Oven To Cool Down.

To Change A Setting,  Just Touch It And The Corresponding Window Will Open, Touch Clear And Using The Numerals Set The New Values, Before You Exit Press The Enter Key In Order To Retain The New Value

The Actual And Degrees Can Not Be Changed From The Keypad.

Contact Us

By email at:
sales@sibeautomation.com

 

By phone at
678-860-1741

 
By fax
352-690-7421

 

By mail:
1521 S.W. 12th Avenue, suite 700
Ocala, Florida 34471

Check Us out...